|
The HeatTrak® Industrial Heated Stair Mat is an electrically heated mat designed to prevent snow and ice accumulation on stairs.
The mat plugs into any standard 120V or 240V outlet generating heat to melt snow at a rate of 2" per hour. It is built with non-slip, reinforced natural rubber and is designed to be left outside for the entire winter season. The mat comes with grommet holes in every corner (and every three feet of length depending on the size) to help secure it in place.
Each Stair Mat has watertight connector cables enabling it to connect to additional Stair Mats. Up to 15 amps can be connected on a single plug. Every ordered set of Stair Mats comes with 1 inline GFCI plug (ground fault circuit interrupter). Please note: If you are ordering Stair Mats for more than one location you must place a separate order for each location.
The HeatTrak® Industrial Stair Mats are built with non-slip, UV protected rubber, and are designed to endure harsh wear.
The HeatTrak® Stair Mats are designed to be left outside for the entire winter season. The stair mats come in sets of up to 10 stairs (depending on the size of the stair mat).
Each stair mat set is attached to a power supply cord and the individual stair mats are connected together by 18” long connector cables. The stair mats come with grommet holes in every corner (and every three feet of length depending on the size) to help secure the mats to the surface.
Surface
Thickness: 1/2"
Chevron Height: 1/8"
Grommet Size (Inner Diameter) 1/2"
Material: Reinforced natural rubber
Heating Element
Voltage: 120Vac or 240Vac
Power Density: 37 Watts/SF* |
In-line Safety Device/Power Cord
Service voltage: 120Vac or 240Vac
Circuit breaker rating: 15A
GFCI trip level: 6mA
Cold lead length: 6 ft
Cord length between stairs: 18"
Cord gauge: 14/3 SJTW
|
* SF area of the heating elements. There are no heating elements within the 2" perimeter of the mats.
Download the instruction manual for Industrial Heated Stair Mats
|
Call Us: 866-561-1921 
Email Us: 
