The HeatTrak® Industrial Heated Walkway Mat is an electrically heated mat designed to prevent snow and ice accumulation.
As opposed to the HeatTrak Residential Products which are made exclusively for residential use, the HeatTrak Industrial products are designed for areas with heavier foot traffic. The Heated Walkway Mat is made of an electrically operated heating element sandwiched between two protective surfaces of non-slip rubber, making it as durable as automobile tires and allowing it to endure harsh wear.
It plugs into any standard 120V or 240V outlet generating heat to melt snow at a rate of 2" per hour. The mat can be secured to the ground using its built-in grommet holes and is designed to be left outside for the entire winter season. The Industrial Heated Walkway Mat comes with its own GFCI plug (ground fault circuit interrupter).
The HeatTrak® Walkway Mat is designed to act as an entrance mat.
The HeatTrak® Walkway Mat is built with non-slip, UV protected rubber, and is designed to be left outside for the entire winter season. The Walkway Mats come with grommet holes on each side (approximately every three feet) to help secure the mat to the surface.
Chevron Height: 1/8"
Grommet Size (Inner Diameter) 1/2"
Material: Reinforced natural rubber
Voltage: 120Vac or 240Vac
Power Density: 37 Watts/SF*
In-line Safety Device/Power Cord
Service voltage: 120Vac or 240Vac
Circuit breaker rating: 15A
GFCI trip level: 6mA
Cold lead length: 6 ft
Cord length between stairs: 18"
Cord gauge: 14/3 SJTW
* SF area of the heating elements. There are no heating elements within the 2" perimeter of the mats.
Download the instruction manual for Industrial Heated Walkway Mats